Cabbage gets busy.....
Thought we should finally add the locking toggle to the Module ends
As you can see here we have added the 110mm long piece of 20 x 20mm pine
The M5 x 50 bolts were recessed into the plywood as they were a bit short
We would recommend M5 x 60 or 65 for a better fit
Thanks must go to Lawence Boul for his comment at the convention that we should make it so the toggle can go righty tighty and in the latest designed batch the dowels have been shifted to the opposite sides to allow this
The toggle now tightens by 1/4 of a turn giving a very firm grip between the two end
Now to add some middles to all these ends.....
.......Have to lay down in the back seat to measure the maximum module length......
Must also think about building one or two BIG turning modules