Tuesday, June 09, 2009

Ducking Ugly

AmFet writes: Let me take you back into the mists of time, back to a place where dinosaurs ruled the earth and Michael Jackson still had his original nose.....

Tasman Pulp And Paper, on the lookout for a heavy shunter for their Kinleith mill, bought DA512 off the railways and, with typical BOP cunning, quickly pimped it into a low nose, twin control stand behemoth. Aghast, TranzRail (slightly niffed that someone had stolen the title of "Ugliest thing on Rails" from underneath them) promptly bought it back, effectively stifling the competition. In a supreme stroke of brilliance, shunters refuges were added and the whole thing painted in green to really cement its place in the pantheon of ugliness. It seemed there were no longer any mountains to climb, so it was sent to Taranaki for Drew to start lineside fires with, raising the ire of a whole new set of fans....


So why am I DAR'ing? Couple of reasons to be truthful....first, any model of Whareroa will need a shunting locomotive, and until the peanut gallery actually stop talking and start modelling, I'm picking we wont be seeing a DSC soon. And an SD7 powered loco for shunting doesnt sound half bad. Secondly....I think I'm starting to like the beast .....

The Head Druff started the ball rolling by dispatching via Her Majesty's Post the remnants of his two ABW Da's, as well as a stillborn Db conversion conjured up by yours truly while living over the hill in the Wairarapa. A quick dry run showed what could be possible....


This morning, I managed to push the girls of the house out to Ballet, so the house was free to fill with solder fumes....

First job was to take apart the Db footplate and trim back the side sills. I'm still not sure what to do here, but I'll think of something. The cab window was enlarged to the front on the drivers (R) side and to the back on the other (L) side, after which small inserts were soldered into the remaining small window and files over. The long hood and cab were then assembled, and the first problem with the instructions provided with the kit were found. I think I would have appreciated it if the designer had included a list of words that could be used during certain phases of construction, cos I exhausted all mine! I had a real problem rolling the cab roof over without the etched line folding in sympathy. In fact, in the end the whole thing on one side snapped, despite me trying to tack solder, bend, tack solder, bend, move on....In the end, I just gave up and used up most of my solder on it, then clogged my needle files cleaning it up. Luckily, Cabbage Stokes (From up the Valley) has told me that is an accepted way of doing things, so who am I to argue?


So after a mornings Fettling, this is where I am. The low nose will get done next, and I think I will try and reuse the nose from the kit. Negotiations are also underway with the Able Sqn Ldr to snare an SD7 chassis in a prisoner exchange. I'm fair pooing myself thinking about building those refuges though...

Monday, June 08, 2009

Diesel in a Day (or two): DFT Part 4

A few days hence, DB returns to the safety of the train room.

When we left our last exciting episode, things were pretty much complete above the side sills, so that left the nether regions to do. The DFT s(and DFs) have a big girder under the sills, but I don't have any plastruct girders and attempted to make something credible up out of some flat strip with a tiny square rod stuck on one edge. These are lying under the DFT cab in the pic below although they're pretty hard to see in this pic.

I also fabricated headstocks - the front one has a little more detail than the back as I rarely look at the back of these things when they're chugging around a layout. These were each attached to a big square styrene rod to keep things at 90 degrees to the floor. These rods will also be the mounting place for the couplers later on. Speaking of couplers, as I'm not 100% sure where they will sit at this stage, I made a reasoned guestimate and cut a decent sized hole for them in the headstocks that I can with paper later on if need be. Good old paper.

The homemade faux-channel was then glued under the floor between the ends of the rods - all carefully calculated so the 'girders' would sit outside the Kato mech's pickups.

For my other DFs I made all the fairings, steps, jacking pads/sandboxes/etc by cutting them out of the paper plan and simply glueing them on. These have for the most part held up pretty well over the past 20 years but this time I went to the other extreme and made them all out of styrene, mainly out of solid rodding (I just love all those strips and shapes and squares and rectangles and things).

The main air tanks could have been stolen from the SD40-2 shell as I've done in the past , but they are a little small in diameter, so this time I made them out of airplane-kitset-sprue stuck in a big drill and attacked with sandpaper to round off the ends. The poor man's lathe. I didn't bother with that last step for the two wee cyls under the cab on the port side.

I went to town and made a few other details that I could see in the grainy protype pictures available on the web from plastic and wire (traction motor cables). The most silly being the wee lifting eyes above the bogies and on the headstocks. I'm not sure whether much of this will be visible when the paint goes on... A few lift rings for the roof, a sinclair radio antenna, ditchlights, wipers and brake hoses came from my collection of US N scale detail bits, but could just as well have been made from styrene and fine wire. Or left off. The headlights front and rear came from US shells, as probably did those horns, which are actually pretty awful. A lot of these details seem to vary by loco so again, mine might be a bit 'representative' rather than an exact copy of a specific loco. It's the effect that matters in NZ120.

Despite that comment, those with 20/20 memories may have detected that the cabsides (and the previously grossly oversized MU connector on the nose!) have been replaced since last time. I was going to make a black DFT with powdercoated sliding side windows, but have since decided to do 7132 in blue, which still has the original style side ones.

I wish it still had the original front windows rather than the cross-eyed triclops look as well...

Sunday, June 07, 2009

Great Workbenches of the World: New York

Tonight we wander north of the equator and east of Manhatten to Long Island, NY to the domain of that expatriate wanderer Kiwibonds for our feature workbench:

Kiwibonds notes:

-That bench was donated to me by my first Wellington flatmate and has moved house about a dozen times (and country three times).

-Black swivel thing on the right is a light - really important.

-Heavy tools in the yellow box below the bench, small tools (files, screwdrivers, wee drills, knife blades, frequently used dremel bits) in the yellow box at the back of the table

-Carefully filed plans by knee sit on top of plastic drawers of bits and paints (the latter of which clearly rarely return to their home state)

-Carpet (out of frame) covered in plastic and resin shavings due to vacuum cleaner being unable to physically enter room at present.

-Working area is that little piece of customwood which gets replaced when it gets too cut up... as does the page from the MR. makes cleaning up really easy - well of that few square inches

-Spot the DG paint chip in the middle of the pic!

-Most important tools: knife with fresh blade, metal ruler, tweezers (oh those annoying nose hairs)

I think its interesting to see both Head Druff and Kiwibonds performing such wondrous feats of construction from such modest spaces. And I think there is a message in there for all of us "watchers"....

Any other entries for the series?

Saturday, June 06, 2009

Manly pusuits

This afternoon, it was time to again face my fear of homicidal power tools. this afternoons chosen weapon was a saw bench I had borrowed from a workmate (cheer's Mark).


I had carefully done the calculations to cut up the sheets of MDF several times. however the best laid plans of mice and men often fail when confronted by power tools. I had problems keeping everything straight. Hopefully I can sort this out at the assembly stage.


Note the large gap at the far side. with a bit of work I think I can close this up....

And at the finish? It appears that I still have a full set of fingers.

Saturday morning live

Its been just a bit to organised round here recently for my liking, so I'm just going to write something off the cuff for a change (just like in the old days, drivel thats badly spelled :v).

Went to the monthly support group Thursday night. I do enjoy these meetings, as its nice to sit down and have a look at the latest goings on. I saw close up a couple of D class models, which I can remember reading about in the journal back in the 1980's when I were a lad (basically the local group got together and designed and built a kit for a loco since few had those skills). This then lead to the discussion on how you fit engines etc in something so small. I then commented that some of my models could be parked inside it!. I also took along some of my finished Lc, La and W wagons which were positively commented on.


A few things up this weekend. The wood is all delivered and I'm going to fire up the saw bench to start on my baby modules. I will be keeping a close eye on the number of fingers during the cutting.

As and aside here now, I've been wondering if there is any interest from people out there in buying a mold for Lc (and late model La) brake detail. I've decided that I can't sell these items as they are so delicate, but selling a mold for those out there in blogland can make their own (and 20-25 sets). I also do not have the skills to etch them at the moment.


Price would be around $15 if anyone is interested. is there anything else people would like to see in a mold like this for 4 wheeled wagons?

Friday, June 05, 2009

Diesel in a day: DFT part 3

DB continues from where we left the last episode....

Now it’s time to start attacking that N scale donor shell for some detail parts. I used the SD40-2 top’s dynamic blisters (sanded down a little to make them a little less angley) and an SD70 fan for the dynamic brake fan (as it’s larger than the dash 2 fans, although you can get away with either). The main intakes can come from almost any American engine shell, but I used the SD70 ones again - they're a little bigger. On the DFT, the one on the port side is longer, extending further aft. Avast landlubbers! Raise the mainsail and deploy the sphincter to leeward! I know these aren’t the 'official' locomotive-navigation terms, but they make far more sense to me than No1 end, A side. Note also the rear horn recess made by pushing the paper panel down into the notch created for it earlier (just north of the south radiator at about 2pm). The DFT roof adornments took longer to make than expected given that they look pretty simple. I scrawked a thickish piece of plasticard for the raised manifold cover (it probably should be a little taller) and used the exhaust port from the SD70 shell after severely thinning it in most dimensions. Close enough.

With the heavy lifting done, I figured it was safe to install the cab, and a minute later it was in place. A nose was then made from thick plasticard and left to set. Cripes, it’s been a long afternoon. Time for dinner methinks. Time is 6:30.
Post culinary replenishment, the nose was sanded to shape and attached, along with a few other detail items. The cab roof was made from very thin aluminium sheet - highly recommended. That cab corner joint looks a little messy toward the bottom in the closeup picture but I don’t remember noticing that at normal magnifications. I hadn't noticed how the laser printer dithered the window rubber surrounds either. Maybe I need glasses.

You may also be able to see how I deployed my 25 year old razor saw to cut a notch along the front of the anticlimber. Later on I'll stick a handrail in there.

Some false rear radiators were made from roofing styrene painted gray, and the see-thru mesh attached with contact and superglue. Here the big roof one is about to go on.

9:25 pm and I'm pooped. Technically that’s the top done in a day. At least the top of the top. Less than a day really given the 1pm start. I should go on to add headstocks and the undergubbins to finish it off... but... the only TV show I watch - Two and a Half Men - is about to start.

It's all about the priorities.

More to follow, so don't touch that dial.

Thursday, June 04, 2009

When Less is More

AmFet Says: After the histrionics involved with snapping 7241 (as detailed previously), I realised that since making the change to Nz120 I was burning off significantly less electrons when recording a locomotive "on film" than I did when I was thinking in the larger scales. Point in case: DC4110 at Wellington, 57 shots. DFB7241, just 10!

I think the difference is that when photographing for the larger scales, I would be taking photos of every single patch of rust, thus allowing it to be recreated on the model. I think the goal was to create realism of the whole by concentrating on each small detail, almost at a molecular level. Now I'm thinking in Nz120, and the more important thing now (as I see it) is to achieve realism by not treating it as a "jigsaw" of realistic pieces, but blending everything together to create a realistic "look". Also, I dont take as many detail shots as I did. Whats the point of recording the double-dopplemeyer snufting valve with overhead double cam lifters if its only going to measure 0.02mm on the finished model?

Anyway, this is what I do, and in the right circumstances you can be in and out in 5 minutes (much like the SAS):

- Quarter shots from each direction. Much more useful than straight side or front on pictures, and if your Megapixels are set high enough you can zoom into any feature later.

- Numbers from straight on, in case I want to do decals of them later.

- Numberboards front and back, for a similar reason

- Front headstock, because this is what "leads" the locomotive and its nice to be able to refer back to it if need be.

- Finally, anything else that catchs my eye. For 7241 it was the "scuffs" on the TranzRail Decal on the left side, which may be possible to do on a model.

In all, it took me longer to walk out to the locomotive than it took me to photograph it. And another bonus to this is it keeps you in the good books of the running staff if you were a guest at a depot, as these guys are busy and you dont want to hold them up for too long.

POSTSCRIPT:

At the urging of Kiwibonds, I have added this pic for the sake of completeness. This is actually the top of 7335 at Westfield, but if you can get to a SAFE POSITION to photograph the top of your subject, take the chance offered. As it is the area you see the most of, it will be invaluable (Thanks to Skippy for the pic).

I think I will do a future post of loco roofs, just to show you it isnt all grey paint and exhaust smudges!