LC wrap up

 DB finishes up:

A bit of paint, weathering, coal and decalling has this batch of LCs (10 of Lewis H's latest model and two of the older prints) added to the coal train. My homemade black-on-white laser printed 'Lyttelton coal traffic' decals somtimes exhibit a little cracking at the edges if they are cut out with a less-sharp knife, and then some white shows through, so most of that was touched up with some flat black paint.

One of the neat features of the latest iteration of the 3-Foot-6 LC is that, because it is downscaled from an Sn3.5 model, it has a lot of really nice fine detail in the doors, end handgrabs, and a footstep at one end. Picking the last two items out in white really makes the wagons look nicely detailed. I need to add a few handbrake levers at some stage. Something that might be a good thing to etch.  

Recent efforts with the Trackgang whitemetal kits and 3-Foot-6 3D-printed ones have eradicated my early 1990s bog-cast resin ones from service, leaving me with a pretty good looking decent-length classic 1980s Midland Line coal train. When you add locos, guards van and the little protective XP or KP in front of it, it is about 2.1m long, or as long as the Studholme loops will take. 

The train looks pretty good. Hardly finescale, but its uber-Bondscale quality. 

I'll probably add another 5-10 of Lewis' next version, as I'd like to have the option of having an even longer train, plus having a few extras to drop into normal goods trains. And it sounds like a few LAs might be on the cards too. 

In summary, with no naked-eye visible strata, these latest LCs take the 'Nicest 3D Print That I Have' title away from the ZAs, and with the addition of new floor mounting points and some interior door lines, they will be just perfect. As Lewis says "the beauty of this tech is we can constantly and fairly easily iterate our designs to improve them"

And all credit to him for not only making these models available to the NZ120 community (filling the void left by the demise of Shapeways) but continuing to improve them; and to the earlier pioneers of 3D printing whose designwork have enabled this. And in the days before 3D, lets not forget Russell Jones' Trackgang (and Pat Eade's earlier Trackside) - all of this had made NZ120 a more viable scale. Three cheers for the suppliers!