I've had a couple of Shapeways 3D prints for a long time now. The had a clean a while ago (several trips through the soncator at work in beakers of Pyroneg (a lab glassware detergent) which seems to have removed the oily support (I can't smell it anyway).
I then primed with Tamiya spray paints . Hull Red for the DF
And a Grey for the Bedford bus.
This has odd unsmoothed areas above the wheel wells which will be challenging to get rid of.
2 comments:
What colour undercoat would you recommend for Midland Red top coat? Reds tend not to have good coverage and the underlying colour often shows through.
Sorry I mised this.If you ahve a fossick back through theblog you can see how i paint my reds. Its in the Da tag. Basically I start with a red oxide and then 2-3 coats of Tamiya red.
Post a Comment