To infinity and beyond!

Well that was the quote for the convention, Thank you Mish.

The micro modules were on display with plenty of interest being shown by all scales, the idea of the interlocking ends was a complete hit, 4 pairs of ends were sold including 2 pair to NZ Finesclaes for an NZ64 scale table top layout. Had to break down the examples at the convention to meet demand.

So for the next convention lets see if we can get together and make up an NZ120 layout and run some real trains, so let's take it to the next level and see if we can go "To Infinity and Beyond"

More ends are going to be cut as soon as I can get down to Orrsum next week, the cost has been set at $10 each $20 for the pair.

There is no standard length or width only that each module end is one of the cut ends available through this blog, what you put between the ends is up to you.

With as little or as much track and scenery as you like, some suggestions have been bridges supported on the tables on each side, large shunting senses like Marton or Whareroa and balloon loops for turning.

So let's see what you have

To Infinity and Beyond